Second Decking

HACCP | NORMEN | CERTIFICATES | CONTACT

Home

Second Decking

Home

- - - - - - - - - - - - - - -

TEMP CONTROL:

- - - - - - - - - - - - - - -

CARGO CONTROL:

- - - - - - - - - - - - - - -

STORR B.V.:
+31 (0)55 - 737 01 40

DOUBLE DECKING

HIGHER LOADING RATE

Adjustable 2nd decking

The platform is constructed by connecting two floor beams with a supporting frame consisting of aluminum tubes (40 x 40 x 3 mm), on which a wooden or plastic supporting surface can be placed.

As both unlock-pawls are connected to each other,
the platform is easily height adjustable.

MOST COMMONLY USED DECKING BEAMS:

7100 and 7100-90

7100 Decking Beams GLB 1000 Airline 7100-90 Decking Beams GLB 1000-90º Airline
7100	Aluminium Decking Beam 66 x 84 mm	For internal width at least 2390 mm	1000 daN
7100-90	Same as the GLB 1000, but on one side with a 90 ° pivotable end piece.

TRACKS for Decking Beams 7100 and 7100-90
5000 Airline track Aluminium Standard length: 3 m. H x d: 95 x 12 mm.			5020-Double Track Aluminium Airline track Standard length: 3 m. H x d: 190 x 12 mm.

5200 Airline track Aluminium Standard length: 3 m. H x d: 50 x 12 mm.

OTHER DECKING BEAMS and CORRESPONDING TRACKS:

7007 and 7007-90

7007 Decking Beams GLB 1000 7007-90 Decking Beams GLB 1000-90º
7007	Aluminium Decking Beam 66 x 84 mm	For internal width 2450-2530 mm	1000 daN
7007-90	Same as the 7007, but on one side with a 90 ° pivotable end piece.

TRACKS for Decking Beams 7007 and 7007-90
7002 and 7002-Tandem Aluminium track Standard length: 1960 mm Versions: single and double			OPTION: Cut out the stop at track bottom Normally, the tracks have beam stops which makes it more difficult for the unauthorised removal of the beams. The beams in those tracks simply store at roof level. Note: The beam stop is not a 'fail safe' device. The stops can be disabled (permanently cut out) when removal of beams is required.
7002 H x d: 85 x 12 mm 7002-Tandem H x d: 170 x 12 mm			Left: Stop at bottom of track has been cut out Right: Stop at bottom of track has NOT been cut out
7102MV and 7102MV-Tandem Aluminium track Standard length: 1960 mm			7103 and 7103-Tandem Alumnium track Standard llength: 1960 mm
7102-MV H x d: 85 x 12 mm 7102-Tandem H x d: 170 x 12 mm			7103 H x d: 55 x 17 mm 7103-Tandem H x d: 140 x 17 mm

7100-FL

7100-FL Decking Beams
7007		Aluminium decking beam H x d: 66 x 84 mm	For internal width at least 2390 mm	1000 daN

TRACKS for Decking Beams 7100-FL
5100 Flat aluminium Airline track H x d: 110 x 12 mm			5100-Tandem Flat aluminium Airline tandem-track H x d: 200 x 12 mm

5300 Flat aluminium Airline track H x d: 34 x 12 mm

5001 and 5001-90

5001 Decking Beams 5001-90 Decking Beams
5001	Steel decking beam 66 x 84 mm	For internal width at least 2390 mm	1000 daN
5001-90	Same as the 5001, but on one side with a 90 ° pivotable end piece.

TRACKS for Decking Beams GLB 100 and GLB 1000-90º
5300 Aluminium Airline rail H x d: 34 x 12 mm			5001 Steel Airline rail H x d: 28 x 11mm

PALLET STOPPERS

7007 PALLET STOPPERS

7007

Detail of pallet stopper on top of a cargo beam

A pallet stopper can be added, mounted on a cargo bar. Serves as security against sliding of the pallet, particularly the last bar, positioned near the rear doors, so they can be safely opened.

DOWN

2e DECKING for CURTAIN SIDERS

ALUMINIUM LONGITUDINAL PLANKS
4030 FIXED ALUMINIUM PLANKS Dim.: 2500 x 140 mm - Weight 4,5 kg/m			4130 ADJUSTABLE ALUMINIUM PLANKS Load capacity: 1250 daN at most 2500 mm distance between the pillars. compatable with track 5001.