NETHERLANDS
(Head Office)
STORR B.V.
Address:
De Moestuin 4 - 7325 GD Apeldoorn - Nederland
Phone:
+31 (0)55 - 737 01 40
Fax:
+31 (0)85 - 877 11 95
Gsm:
+31 (0)6 51 52 93 06
DOUBLE DECKING
HIGHER LOADING RATE
Adjustable loadplatform for 2nd decking
Adjustable 2nd decking
The platform is constructed by connecting two floor beams with a supporting frame consisting of aluminum tubes (40 x 40 x 3 mm), on which a wooden or plastic supporting surface can be placed.

As both unlock-pawls are connected to each other,
the platform is easily height adjustable.

MOST COMMONLY USED DECKING BEAMS:
7100 and 7100-90
7100 Decking Beams GLB 1000 Airline
7100-90 Decking Beams GLB 1000-90º Airline
7100 Decking Beam GLB 1000 L, 1000 daN Decking Beamk GLB 1000 R, 1000 daN Aluminium
Decking Beam
66 x 84 mm 
For internal width at least 2390 mm 1000 daN
7100-90 Decking Beam GLB 1000-90, 1000 daN Same as the GLB 1000, but on one side with a 90 ° pivotable end piece.
TRACKS for Decking Beams 7100 and 7100-90
5000 Airline track Aluminium
Standard length: 3 m. H x d: 95 x 12 mm.
  5020-Double Track Aluminium Airline track
Standard length: 3 m. H x d: 190 x 12 mm.
  Airline track 5000     5020-T Aluminium Airline track
5200 Airline track Aluminium
Standard length: 3 m. H x d: 50 x 12 mm.
 
  Airline track 5200  
OTHER DECKING BEAMS and CORRESPONDING TRACKS:
7007 and 7007-90
7007 Decking Beams GLB 1000
7007-90 Decking Beams GLB 1000-90º
7007 Decking Beam GLB 1000 1000 daN LDecking Beam GLB 1000 daN R Aluminium
Decking Beam
66 x 84 mm
For internal width 2450-2530 mm 1000 daN
7007-90 Decking Beam GLB 1000-90º Same as the 7007, but on one side with a 90 ° pivotable end piece.
TRACKS for Decking Beams 7007 and 7007-90
7002 and 7002-Tandem
Aluminium track
Standard length: 1960 mm
Versions: single and double
  OPTION: Cut out the stop at track bottom
Normally, the tracks have beam stops which makes it more difficult for the unauthorised removal of the beams. The beams in those tracks simply store at roof level. Note: The beam stop is not a 'fail safe' device.
The stops can be disabled (permanently cut out) when removal of beams is required.

7002
H x d: 85 x 12 mm



line
7002-Tandem
H x d: 170 x 12 mm

 

track 7002

track 7002-tandem
 
Left:
Stop at bottom of track has been cut out


Right:
Stop at bottom of track has NOT been cut out
track with disabled beamstop track with enabled beamstop
7102MV and 7102MV-Tandem
Aluminium track
Standard length: 1960 mm
  7103 and 7103-Tandem
Alumnium track
Standard llength: 1960 mm
7102-MV
H x d:
85 x 12 mm

line
7102-Tandem
H x d:
170 x 12 mm
track 7102MV

track 7102MV-Tandem
  7103
H x d:
55 x 17 mm

line
7103-Tandem
H x d:
140 x 17 mm
track 7103

70103-Tandem track
7100-FL
7100-FL Decking Beams
7007 7100-FL Decking Beam L 1000 daN 7100-FL Decking Beam R 1000 daN Aluminium
decking beam
H x d:
66 x 84 mm
For internal width at least 2390 mm 1000 daN
TRACKS for Decking Beams 7100-FL
5100 Flat
aluminium Airline track
H x d: 110 x 12 mm
 

5100-Tandem Flat
aluminium Airline tandem-track
H x d: 200 x 12 mm

  5100 track     5120 track
5300 Flat
aluminium Airline track
H x d: 34 x 12 mm
 
  5300 track  
5001 and 5001-90
5001 Decking Beams
5001-90 Decking Beams
5001 5001 Decking Beam Steel  5001 Decking Beam Airline steell R 1000 daN Steel
decking beam
66 x 84 mm
For internal width at least 2390 mm 1000 daN
5001-90 5001-90 Decking Beam Airline steel 1000 daN Same as the 5001, but on one side with a 90 ° pivotable end piece.
TRACKS for Decking Beams GLB 100 and GLB 1000-90º
5300 Aluminium Airline rail
H x d: 34 x 12 mm
  5001 Steel Airline rail
H x d: 28 x 11mm
  5300 airline track     5001 Steel Airline
 
PALLET STOPPERS
7007 PALLET STOPPERS
7007 Detail of pallet stopper on top of a cargo beam Pallet stopper active

 

UP

A pallet stopper can be added, mounted on a cargo bar. Serves as security against sliding of the pallet, particularly the last bar, positioned near the rear doors, so they can be safely opened.
Pallet stopper inactive

 

DOWN

 
2nd DECKING for CURTAIN SIDERS
ALUMINIUM LONGITUDINAL PLANKS
4030 FIXED
ALUMINIUM PLANKS
Dim.: 2500 x 140 mm - Weight 4,5 kg/m
  4130 ADJUSTABLE
ALUMINIUM PLANKS
Load capacity: 1250 daN
at most 2500 mm distance between the pillars.
compatable with track 5001.
  4030 Fixed longitudinal aluminium plank for curtain siders     4030 Adjustable longitudinal aluminium plank for curtain siders